• Use it like a Grid-Tied, with panels only
• Use it as a Load Shedding Solution, with batteries only
• Use it in an Off-Grid situation, not connected to the grid
• Use it in an On-Grid situation, connected to the grid

Deye and Sunsynk come with the same internal hardware, except the software is different on the Sunsynk units. The Deye inverters can be configured remotely via the Solarman application. Access can be granted through Deye support for access to configure the inverter remotely.

• Use it as a UPS (Uninterrupted Power Supply)
• Use it for 3-Phase (1 inverter per phase)
• Use it for Commercial purposes due to its Robust build

Grenex 5.1kwh LiFePO4 Battery

• Advanced BMS with current limiting function • CAN Bus, fully integrates and communicates with the leading Inverters brands(Growatt,SOLAX,LUXPower,DEYE,MUST, Voltronic,Victron,SMA…etc. ) • Excellent high temperature performance • High Cycle Life and Service Life • High Energy Density and conversion efficiency • Complete with integrated Battery Management System • Compatible with most Inverters and chargers • Low self-discharge • Easy wall mount or shelf rack installation • Heavy-duty side handles for easy handling and mounting on the wall 5-Year warranty • Built-in protection for over-charge, over-discharge & over-temperature

Limited stock with our distributor in Sandton

AC Protection box with earth leakage

Kindly specify for breaker sizes required for your specific requirements

Standard Includes:

• 1x 63 Amp changeover switch
• 1x 63 Amp Earth Leakage
• 1x 12 way MOD surface board
• 1x 10Ka Lightning Arrestor
• 1x 63 Amp CB isolator

Fused Combiner box 2-in 2-out IP65 1000V

Can be custom designed by our engineer based on the application. Prices might differ depending on requirements.

DC BATTERY ISOLATOR WITH 160A FUSES

100m 6mm Helukabel solar cable Red and Black

MC4 Connector Male and Female Pair

SOLD IN PACKS OF 5

4.45m Mounting Rail

End Clamp+ 30 – 50mm Silver

Solar Panel Mid Clamp

Stainless steel tile roof hook

Stainless steel Tile roof hook T bolt M8*25 Allen bolt+ flunge nut =1set Self-tapping bolt : 6.3*80mm=3 pcs

Installation includes: Labor for installing inverter, solar, and batteries for an 8kw inverter system with a certificate of compliance on all workmanship done on the installation and wiring of the solar system. The technician is a fully qualified electrical engineer, master wireman, Greencard certified, and experienced electrical and solar installer. The inverter is integrated into the main DB of the property, connected to power essential loads with no back-feeding into the Eskom grid. Feeding into the Eskom grid can be arranged with our electrical engineer. The inverter is configured to communicate with batteries and all wiring and protection devices will be installed appropriately based on all SANS electrical standards. Earthing and trunking will be installed to ensure the system is safely and neatly installed with all wiring done and sized correctly to ensure resistance is kept at a minimum. Transportation from our warehouses by the installer to the installation site is included in the installation cost. The installation service covers a complete functioning solar system installation, however, any electrical work, AC or DC, or any other work requirements outside the scope of the solar system installation cost, is not covered and can be quoted for additionally.